This assignment is designed to assess

Prepared by: Mr. Naveed Dilber Moderated by: Dr. Imran Jokhio, July, 2018 Assessment Details and Submission Guidelines Unit Code BN321 Unit Title Advanced Network Design Assessment Type Individual written report and demonstration Assessment Title College Network Design Purpose of the assessment (with ULO Mapping) This assignment is designed to assess students knowledge and skills related to the following learning outcomes: b. Analyse network design requirements c. Develop appropriate frameworks and standards for network implementation Weight 15% of the total assessments Total Marks 50 Word limit 1000 1500 Due Date 4th September, 2018 (23:55) DD Demo: Week-8 Laboratory session Submission Guidelines All work must be submitted on Moodle by the due date along with a completed Assignment Cover Page. The assignment must be in MS Word format, 1.5 spacing, 11-pt Calibri (Body) font and 2 cm margins on all four sides of your page with appropriate section headings. Reference sources must be cited in the text of the report, and listed appropriately at the end in a reference list using IEEE referencing style. Extension If an extension of time to submit work is required, a Special Consideration Application must be submitted directly to AMS. You must submit this application three working days prior to the due date of the assignment. Further information is available at: http://www.mit.edu.au/about-mit/institute-publications/policies procedures-and-guidelines/specialconsiderationdeferment Academic Misconduct Academic Misconduct is a serious offence. Depending on the seriousness of the case, penalties can vary from a written warning or zero marks to exclusion from the course or rescinding the degree. Students should make themselves familiar with the full policy and procedure available at: http://www.mit.edu.au/about-mit/institute-publications/policies procedures-and-guidelines/Plagiarism-Academic-Misconduct-Policy Procedure. For further information, please refer to the Academic Integrity Section in your Unit Description. BN321 Advanced Network Design Page 2 of 4 Prepared by: Mr. Naveed Dilber Moderated by: Dr. Imran Jokhio, July 2018 Assignment description In this project you are required to design a network for an IT College that has recently leased a building in Melbourne CBD with the aim of offering IT related courses to its students. Upon initial planning, you have identified that there are 400 users in the college, 300 users in building 1 and 100 users in building 2. Every building has a spacious lobby for users which is 200 meters open space where wireless access is required. Only authorized users should have the access to this wireless network. Distance between these college buildings is 500 meters. A high speed internet connection is required which needs to be shared among the users. Selection of appropriate standards and technology for network implementation plays a vital role in this project. Building 1 has four computer labs and building 2 has three computer labs. Each lab uses 35 computers. Each lab will also have a server in the closet located inside the lab. IP phones are located in each lab to communicate to service desk. The IT Institute also wants to setup four classrooms, each containing one computer which requires internet connectivity. Your task is to come up with a logical, efficient and scalable network design that will be suitable for this institute. The institute has allowed an adequate budget to purchase any networking devices that may be required, yet obviously does not want to spend more than necessary. In addition, industryspecific standards must be used and apply to IT infrastructure and services. Write a report and include: 1. Build a document giving all the necessary network designs (enough information should be provided that will allow any technician to build your network structure from scratch). 2. Simple IP addressing solution (step by step workout of the calculations) that leaves room for growth, is easy to administer and has the minimum wastage of available IP address space. 3. Write configurations of each networking device which are included in the network. 4. Configure two switches and two PCs on physical networking devices and demonstrate the working model. Demonstration: Students should be ready with all setup and configurations before start of the laboratory class. Tutor will ask 3-5 questions to each student to demonstrate any configuration of the setup. Demonstration from each student should not be more than 5 minutes. BN321 Advanced Network Design Page 3 of 4 Prepared by: Mr. Naveed Dilber Moderated by: Dr. Imran Jokhio, July 2018 In your report include the following contents Project Scope Detailed Network diagrams Project hardware requirements Name of the network device with manufacturers name, series, model and ports Type of the cables used Name of the server, PC with specification such as operating system, RAM, hard disk etc. Network device configurations Include most of the suitable feature which you have studied from laboratories 1 to 6. Marking criteria: Section to be included in the report Description of the section Marks Project scope Outline of the report 3 Project hardware requirements Name of the network device with manufacturers name, series, model and ports Type of the cables Name of the server, PC with specification such as operating system, RAM, hard disk etc. 7 Network Design Include a diagram of your designed network, and write justifications of your design 10 Network device configurations Configuration commands to configure network 10 Demonstration on physical devices Demonstration of configured network devices during lab time 15 Reference style Follow IEEE reference style 5 Total 50 BN321 Advanced Network Design Page 4 of 4 Prepared by: Mr. Naveed Dilber Moderated by: Dr. Imran Jokhio, July 2018 Marking Rubric Grade Mark HD 40-50 DI 35-39 CR 30-34 P 25-29 Fail <25 Excellent Very Good Good Satisfactory Unsatisfactory Project scope /3 Concise and specific to the project Topics are relevant and soundly analysed. Generally relevant and analysed. Some relevance and briefly presented. This is not relevant to the assignment topic. Project hardware requirements /7 Demonstrated excellent ability to think critically and sourced reference material appropriately Demonstrated excellent ability to think critically but did not source reference material appropriately Demonstrate d ability to think critically and sourced reference material appropriately Demonstrated ability to think critically and did not source reference material appropriately Did not demonstrate ability to think critically and did not source reference material appropriately Network Design /10 Logic is clear and easy to follow with strong arguments Consistency logical and convincing Mostly consistent logical and convincing Adequate cohesion and conviction Argument is confused and disjointed Network device configurations Switch configuration /10 All elements are present and very well integrated. Components present with good cohesive Components present and mostly well integrated Most components present Proposal lacks structure. Network device configurations Router configuration /15 All elements are present and very well integrated. Components present with good cohesive Components present and mostly well integrated Most components present Proposal lacks structure. IEEE Reference style /5 Clear styles with excellent source of references. Clear referencing style Generally good referencing style Sometimes clear referencing style Lacks consistency with many errors

Pssst…We can write an original essay just for you.

Any essay type. Any subject. We will even overcome a 6 hour deadline.

<< SAVE15 >>

Place your first order with code to get 15% discount right away!

Impressive sample results